The ultimate one-step, polymer-fortified thin-set that provides unsurpassed strength, far exceeding all ANSI A118.4 and ANSI A118.11 strength requirements.
Ideal for interior and exterior applications on virtually all substrates and applications, even pools, fountains and facades.
Increases your productivity with long open time, allowing flexibility on the jobsite that results in fast, accurate installations.
Easy to trowel mortar assures proper coverage on both the substrates and the veneer as well as less fatigue for the installer.
No need to worry with porcelain tile, even in the most difficult projects.
The exceptional bond strength and easy workability of LATICRETE 254 Platinum makes this multipurpose the ultimate adhesive for difficult to bond porcelain tiles as well as glass mosaics and large format glass.
Inhibits the growth of stain-causing mold and mildew in substrates with Microban antimicrobial protection.
Features - Benefits
Tenacious Bond - Superior adhesion to a wide variety of substrates and veneers, allowing for installations in virtually all climates and conditions such as exterior facades, pools and fountains.
40 Minute Open Time - Increases productivity and flexibility on the job site, resulting in fast, accurate installations.
Smooth Creamy Formula - Easy to trowel mortar assures proper coverage on both the substrate and the veneer.
Specially Formulated for Porcelain and Glass Tile - Provides 2.5 times the ANSI requirement for shear bond strengths.
Stable, Long-Life Formulation - Will not deteriorate over time, making LATICRETE® 254 Platinum suitable for interior and exterior applications, particularly continuous submersion.
A Component of the LATICRETE Lifetime Residential Warranty and LATICRETE 25 Year System Warranty - Performance backed by LATICRETE means peace of mind for trouble-free installations in both interior and exterior applications.
Contains Microban® - Inhibits the growth of stain-causing mold and mildew in the mortar with Microban antimicrobial protection.
For all ceramic tile, porcelain, glass and stone installations
For both interior and exterior applications
Excellent for facades and underwater applications
Exterior Glue Plywood* n Existing Ceramic Tile
Properly Prepared Vinyl* n Cement Backer Board**
Concrete/Masonry n Gypsum Wallboard*
Concrete Block n Gypsum Plaster*
Cement Mortar Beds n Cement Terrazzo
* Interior Use Only.
** Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.
50 lb bag (22.7 kg); 54 bags per pallet
Grey and White
1/4" x 1/4" (6 mm x 6 mm) notched trowel 80 – 95 ft2 / 7.4 – 8.8 m2
1/4" x 3/8" (6 mm x 9 mm) notched trowel 60 – 70 ft2 / 5.6 – 6.5 m2
1/2" x 1/2" (12 mm x 12 mm) notched trowel 40 – 45 ft2 / 3.7 – 4.2 m2
LATICRETE® 254 Platinum provides unsurpassed strength, far exceeding all ANSI requirements.
This exceptional bond strength is backed by a LATICRETE Lifetime Residential Warranty.† There is no need to worry about tile and stone failure, even in the most difficult projects.
LATICRETE 254 Platinum is ideal for interior and exterior applications on all suitable substrates, especially pools, fountains and
facades. In addition,
LATICRETE 254 Platinum has exceptional bond strength and easy workability making this multipurpose thin-set ideal for difficult to bond porcelain and glass tiles.
LATICRETE 254 Platinum is available in standard and rapid versions which allows for grouting in 2 – 4 hours.